Other Handy Functions
CD
changer
mode
Number
of
titles
CDC655z
connected
60
titles
CDC655Tz
connected
100 titles
CDC1255z
connected
50
titles
Entering
titles
Titles up to 10 characters long can be stored in
memory
and displayed for
TV
stations
The
num-
bers
of
titles that can be entered for each mode
are as follows
Clearing
titles
1 Select and
playa
CD
in the CD
changer
or
tune in to a
TV
station for which you want to
clear the title
2 Press DISP button
[IgJ
and display the main
3 Press TITLE button
[l]
'TTL" apPears
in
the dis-
play and the display switches to title input display
4 Press
BND
button
[DJ
5 Press and hold ENT button
[lID
for 2 seconds or
longerto clear the title and cancel title input mode
Turning the
external
output
adjustment
display
on/off
When not using the external output, you can put
out the "NON-FADER" display
Adjusting
the
display
contrast
You
can adjust the display contrast to match the
angle of installation
of
the unit
*The factory default setting
is
"8" (Adjustment level:
1 to 18)
1 Press and hold
ADJ
button Wfor 1 second or
longer
to
switch
to
the
adjustment
selection
display
2 Press the right
or
left side
of
SEARCH
button
[H]
to select
"CONTRAST"
3 Turn the Rotary knob
[N]
clockwise
or
coun-
terclockwise to adjust the contrast
4 Press ADJ button
[l]
to return to the previous
mode
Adjusting
the
dimmer
level
You
can adjust the reduced illumination level of
the
dimmer
*The factory default setting is "3"
*
To
use the dimmer, set the dimmer setting to 1
to
5
1
Press
and
hold
ADJ
button
W
for
1
second
or
longer
to
switch
to
the
adjustment
selection
display
2 Press the right or left side of
SEARCH
button
[HJ
to select "DIMMER LV"
3 Turn the Rotary knob
[N]
clockwise
or
coun-
terclockwise to adjust the reduced illumina-
tion level of the
dimmer
• 1
to
5:
The
dimmer
operation is performed depend-
ing on the set level 1 to 5
• OFF:
No
dimmer
operation is performed
4 Press ADJ button
rn
to retum
to
the previous mode
Message
display
When
the unit is powered on
or
off, a message is
displayed
The
user
can turn this message dis-
play
ON
or
OFF
*The factory default setting
is
"ON"
1 Press and hold ADJ button Wfor 1 second or
longer
to
switch
to
the
adjustment
selection
display
2 Press the right
or
left side
of
SEARCH
button
[HJ
to select
"MESSAGE"
3 Turn the Rotary knob
[N]
clockwise or counter-
clockwise to set message display ON or OFF
4 Press ADJ button
[l]
to
return
to the previous mode
15 titles
Number
of
titles
Mode
TV
mode
1 Press FNC button
[I] to select the
mode
you
want to enter a title (CD
changer
or
TV)
2 Select and
playa
CD in the CD
changer
or
tune in to a
TV
station for which you want to
enter the title
3 Press DISP button
[IgJ
and display the main
4 Press TITLE button
[l]
"TTL" appears in the
display and the cursor position flashes
5 Press the right
or
left side of
SEARCH
button
[HJ
to move the cursor
6 Press DISP button
[IgJ
to select a character
Each time you press DISP button
[IgJ,
the char-
acter changes in the following order
Capital letters
..
Small letters
..
Numbers and
Symbols"
Umlaut
..
Capital letters
7 Turn the Rotary knob
[N]
to select the desired
character Turning the Rotary knob
[N]
clock-
wise
moves
the cursor to the next character,
turning it counterclockwise moves the cursor
to the previous character
8 Repeat steps 5 to 7 to
enter
up to 10 charac-
ters for the title
9 Press and hold
ENT
button
I1ID
for
2 seconds
or
longer to store the title into
memory
and
cancel title input mode
16
DXZ715/HX-D10
To Next Page
Loading...
Need help?
General
