Note: Be sure
to
read this chapterreferring
to
the front diagrams
of
chapter
"3
CONTROLS"on page 5 (unfold)
Digital
Radio /
DAB
Operations
DAB
control
function
When a CeNET cable is used to connect a DAB
(DAH913) (sold separetely), all functions can
be
operated
Listening
to
the
DAB
station
1 Press FNC button Wto select DAB mode
2 When the unit receives a DAB station, the
display changes
in
the following order
Frequency
channel"
service label
It'll
Clat--ionil
Switching
displays
Press the DISP button for 1 second during the
Main (service label) display to select Main (ser-
vice label) or Sub (PTY)
Note:
•
The
display shown in the normal reception mode
and
the preset reception mode is the same when
a DAB station is received
Seek
tuning
1 Press FNC button Wto select DAB mode
2 Press and hold right or left for 1 second or
longer using SEARCH button
[H]
It'11
'-.EEK
*"SEEK" appears
in
the display
3 "DAB" lights up
in
the display when the main
unit receives a DAB station
*The main unit stops the seek tuning when it
cannot find a
DAB
station The display returns
to the previous mode
Manual
tuning
1 Press FNC button Wto select DAB mode
2 Press and hold BND button
[TI]
for 1 second or
longer "MANU" lights up
in
the display
3 Press the right or left SEARCH button
[H]
to
select a station
* If
no
operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode
-Preset
reception
mode-
3 When the unit does not receive a DAB station,
the display changes
in
the following order
-Normal
reception
mode-
I"
"
~
r=i
i
I I ...
LE
.-
L-.
=_·1
i
Switching
programmes
1 Press FNC button Wto receive a DAB station
2 Press the right or left SEARCH button
[H]
to
switch programmes
in
the DAB station
Note:
•
The
programme name maybe the same depending
on
DAB programmes
It'li
IMi
Notes:
• The number
of
programmes
and
broadcasting
times depend on the DAB stations
• When the strength
of
DAB signals is weak, audio
output is muted
Programme
scan
This function scans through each receivable
programme
in
a DAB station being received for
10 seconds sequentially This is useful when you
want to search for a desired programme
1 Press FNC button
Wto receive a DAB station
2 Perform the following operation depending
on
the connected model
Press SCN
button!Il
"SCAN" lights up and
the unit starts scanning each programme for
10 seconds sequentially Each time the main
unit scans, the programme name is shown
in
the display
3
To
stop programme scan when a desired
programme
is
tuned
in
Press SCN button
!Il
DXZ715/HX-D10
27
To Next Page
Loading...
Need help?
General
