AC
Processor Operations
Selecting
a
P.EQ
menu
1 Press A-M button
G1l
and select "P.EQ"
"P
EQ"
blinks
in
the display
2 Press BND button
[TI]
to select "BASC" (ba-
sic) "BASC" is displayed
in
the operation
status indication
fD
in
the display
3 Press one of Direct buttons
[ID
and select the
desired
P.EQ
menu
*
To
select the user memory, press BND button
[IT]
to select "USR" and press one of Direct
buttons
[[]
Editing/storing
a
P.EQ
menu (User
memory)
1 Select a P
EQ
menu which
you
want to edit
on
the basis of
2 Press and hold ADJ button
rn
for 1 second or
longer
3 Press the right or left side of SEARCH button
[H]
to select the item to be adjusted
There are correction channel, correction band,
selection of the centre frequency, gain adjust-
ment and selection of the Q-curve available
for the items to be adjusted
I
* For details
on
each adjustment item, refer
to
the
owner's manual supplied with the DPH910
4
Turn
the Rotary knob [j]] clockwise or counter-
clockwise to make the adjustment
5 Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button
rn
6 Press and hold one of Direct buttons
[ID
for 2
seconds or longer to store the edited contents
*
You
can give a title to the user memory For
the
inputting
method of titles, refer
to
the
subsection "Entering titles"
in
section "Opera-
tions
common
to
each mode"
26
DXZ715/HX-D10
To Next Page
Loading...
