Editing/storing a sound field menu
(User memory)
1 Select a sound field menu which you want to
edit on the basis of
2 Press and hold ADJ button
[]]
for 1 second or
longer
3 Press the right or left side of SEARCH button
[B]
to select the item to be adjusted
There are "EFFECT", "DELAY", "REAR MIX",
"REV TIME" or "ROOM SIZE" and "HIGH" or
"LIVENESS" available for the items to be ad-
justed
* For details
on
each adjustment item, refer
to
the
owner's manual supplied with the DPH910
4 Turn the Rotary knob
[N]
clockwise or coun-
terclockwise to make the adjustment
5 Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button
[]]
6 Press and hold one of Direct buttons
[[]
for 2
seconds or longer to store the edited contents
*
You
can give a title to
the
user
memory
For
the
inputting
method
of
titles,
refer
to
the
subsection "Entering titles" in section "Opera-
tions
common
to
each mode"
Professional
modeNSE
operations
Note:
• The adjustment made in professional mode is not
reflected in the adjustment in standard mode On
the contrary, the adjustment made in standard
mode
is
not
reflected
in
the
adjustment
in
professional mode
VSE effect ON/OFF
While the "VSE" indication
II
is lit
in
the display,
the VSE effect is set to "ON"
*
The
factory default setting is "ON"
1 Press A-M button
[j]
and select "VSE"
2 Press DISP button
[g]
3 Press A-M button
[j]
"VSE"
in
the display lit
or unlit
*When "VSE" is unlit, the VSE effect is
set
to
OFF
Note:
•
If
the VSE effect is set to
OFF,
the adjustment
made in "VSE
operations"
is
not reflected in the
music source
AC
Processor Operations
Selecting
an VSE menu
1 Press A-M button
[j]
and select "VSE"
2 Press BND button
[TI]
to select "BASC" (ba-
sic)
"BASC"
is displayed
in
the operation
status indication
m
in
the display
3 Press one of Direct buttons
[[]
and select the
desired VSE menu
*
To
select the user memory, press
BND
button
[II]
to
select
"USR"
and
press
one
of
Direct
buttons
[ID
Editing/storing an VSE menu (User
memory)
1 Select an VSE menu which you want to edit
on the basis of
2 Press and hold ADJ button
[]]
for 1 second or
longer
3 Press the right or left side of SEARCH button
[B]
to select the item to be adjusted
There are "DIFFUSE", "CAR WIDTH" and "CAR
LENG" available for the items
to
be
adjusted
* For details
on
each adjustment item, refer to the
owner's manual supplied with the DPH910
4 Turn the Rotary knob
[N]
clockwise or counter-
clockwise to make the adjustment The adjust-
ment range is from 1 to 10 for each item
5 Repeat steps 3 to 4 to complete the adjust-
ment and press ADJ button
[]]
6 Press and hold one of Direct buttons
[[]
for 2
seconds or longer to store the edited contents
*You can give a title
to
the
user
memory
For
the
inputting
method
of
titles,
refer
to
the
subsection "Entering titles" in section "Opera-
tions
common
to
each mode"
Professional
mode/P.EO
operations
P.EQ effect ON/OFF
While the "P EO" indication
1m
is lit
in
the dis-
play, the
P.EQ
effect is set to "ON"
*
The
factory default setting is "ON"
1 Press A-M button
[j]
and select "P EO"
2 Press DISP button
[g]
3 Press A-M button
[j]
"P EO"
in
the display is
changed from blinking to lit or unlit
*When "P.EQ" is unlit, the P
EO
effect
is
set to OFF
Note:
•
If
the
P.
EO effect is set to
OFF,
the adjustment
made in
uP.EQ
operations"
is not reflected in the
music source
nXZ71 5
IHx-n
1n 25
To Next Page
Loading...
Need help?
General
