If an
error
occurs,
one
of
the
following
displays
is
displayed
Take
the
measures
described
below
to
eliminate
the
problem
A
CD
cannot be played due to scratches, Replace with a non-scratched,
etc non-warped-disc
A CD
is
loaded upside-down inside the CD Eject the disc then reload
it
properly
deck and does not play
This
is
a failure of CD deck's mechanism
and consult your store of purchase
Eject the disc then reload it properly
Lower the surrounding temperature and
wait for a while to cool off MD changer
Eject the disc then reload it properly
This
is
a failure of MD changer's mecha-
nism and consult your store of purchase
Replace with a non-scratched, non-warped
disc
Load a pre-recorded MD in the MD
changer
A
CD
is
caught inside the CD deck and
is
not ejected
A CD inside the
CD
changer
is
not loaded This is a failure of CD changer's mecha-
nism and consult your store of purchase
An
MD inside the
MD
changer
is
not
loaded
A CD inside the
CD
changer cannot
be
Replace with a non-scratched, non-warped
played due to scratches, etc disc
A CD inside the CD changer cannot
be
played because it
is
loaded upside-down
Displayed when the temperature
in
the
MD changer
is
too high and playback has
been stopped automatically
An
MD inside the MD changer cannot
be
played due to scratches, etc
Displayed when a non-recorded MD
is
loaded
in
the MD changer
An
MD inside the MD changer cannot
be
played because it
is
loaded upside-down
ERROR 3
ERROR 6
ERROR 2
ERROR 3
ERROR H
ERROR 2
ERROR 3
ERROR 6
If an
error
display
other
than
the
ones
described
above
appears,
press
the
reset button If
the
problem
persists,
turn
off
the
power
and
consult
your
store
of
purchase
OXZ715/Hx-n10
33