....
BI
The control panel can be detached to prevent theft When detaching the control panel, store it in the
DCP (DETACHABLE CONTROL PANEL) case to prevent scratches
We recommend taking the DCP with you when leaving the car
Removing the DCP
1 With the SLOPING CONSOLE closed, turn
off the power
2 Press the RELEASE button
[I]
deeply to open
the
DCP.
RELEASE button [[l
3 Pull the DCP toward you and remove it
• Always close the SLOPING CONSOLE be-
fore removing the
DCP.
• If you remove the DCP
with
the SLOPING
CONSOLE open, the sloping console closes
immediately Be careful
not
to
get
your
fin-
gers caught
Attaching
the DCP
1 Insert the DCP so that the ® section on the
right side
of
the DCP catches on the hook @
on the unit
2 Press the left side of the DCP carefully to fit it
in place
• The
DCP
can easily be damaged
by
shocks
After removing it, be careful
not
to
drop
it
or
subject
it
to
strong
shocks
• If the RELEASE
button
[I]
is
pressed and
the DCP is
not
locked
into
place,
it
may fall
out
from vibration
of
the car This can break
the
DCP,
so
after removing it, either install
it
on the
unit
or
put
it
in
its
DCP case
• The
connector
connecting
the
unit
and the
DCP
is an extremely important part Be care-
ful
not
to
damage
it
by
pressing on
it
with
fingernails, screwdrivers, etc
Note:
•
If
the
DCP
is dirty, wipe
off
the
dirt
with a soft,
dry
cloth only.
DXZ715/HX-D10
7
To Next Page
Loading...
Need help?
General
