Radio Operations
FM Reception
For enhanced
FM
performance the
mR61:rUNE~®
tuner includes signal actuated stereo control,
Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits
Changing the reception area
This unit
is
initially set to USA frequency intervals
of
10kHz
for
AM
and 200 kHz for
FM
When using
it outside the
USA,
the frequency reception range
can
be
switched to the intervals below
• Setting
the
reception area
1 Press BND button
[IT]
and select the desired
radio band (FM or AM)
2 While pressing DISP button
[j], each time you
press and hold the number "6" of the Preset
buttons
~
for 2 seconds or longer, the recep-
tion area switches from inside the USA to
outside the USA or from outside the USA to
inside the USA
* Any station preset memories are lost when the
reception area is changed
Listening
to
the radio
1 Press FUNCTION button
I]]
and select the
radio mode The frequency
is
displayed
2 Press BAND button
[IT]
and select the radio
band Each time the button
is
pressed, the radio
reception band changes
in
the following order
FM1-+FM2-+FM3-+AM-+FM1
3 Press the right or left side of SEARCH button
[H]
to tune
in
the desired station
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning
Seek
tuning
1 Press BAND button
[TI]
and select the desired
band (FM or AM)
* If "MANU" is lit
in
the display, press and hold
BAND
button
[IT]
for
1
second
or
longer
"MANU"
in
the display goes off and seek tuning
is now available
2 Press the right or left side of SEARCH button
[H]
to automatically seek a station
When the right side of SEARCH button
[H]
is
pressed, the station is sought
in
the direction
of
higher
frequencies;
if the left
side
of
SEARCH button
[H]
is pressed, the station is
sought
in
the direction of lower frequencies
Manual
tuning
There are 2 ways available Quick tuning and step
tuning
When you are
in
the step tuning mode, the fre-
quency changes one step at a time
In
quick tun-
ing mode, you can quickly tune the desired fre-
quency
1 Press BND button
[IT]
and select the desired
band (FM or AM)
*If "MANU" is not lit
in
the display, press and
hold BND button
[TI]
for 1 second or longer
"MANU" is lit in the display and manual tuning
is now available
2 Tune into a station
•
Quick
tuning:
Press
and
hold
the
right
or
left
side
of
SEARCH button
[H]
for 1 second or longer to
tune
in
a station
• Step
tuning:
Press the right or left side of SEARCH button
[H]
to manually tune
in
a station
Recalling a
preset
station
A total of 24 preset positions (6-FM1, 6-FM2,
6-
FM3, 6-AM) exists to store individual radio sta-
tions
in
memory Pressing the corresponding pre-
set button recalls the stored radio frequency au-
tomatically
1 Press BND button
[IT]
and select the desired
band (FM or AM)
2 Press the corresponding Preset button
~
to
recall the stored station
* Press and hold one of Preset buttons
~
for 2
seconds or longer to store that station into pre-
set memory
Manual
memory
1 Select the desired station with seek tuning,
manual tuning or preset tuning
2 Press and hold one of Preset buttons
~
for 2
seconds or longer to store the current station
into preset memory
Auto
store
Auto store is a function for storing up to 6 sta-
tions that are automatically tuned
in
sequentially
If 6 receivable stations cannot be received, a pre-
viously stored station remains unoverwritten at
the memory position
1 Press BND button
[IT]
and select the desired
band (FM or AM)
l 1)(27 1
~:)
/ ! !)( [ J
II
)
To Next Page
Loading...
Need help?
General
