* Select
one
of
OFF
(dimming OFF; bright),
1 (slightly dimmed) to 5 (dark).
4.
Press the [A] button
to
return to the original
mode.
Adjusting
the
contrast
of
the
display
(CONTRAST)
You
can adjust the contrast of the display
to
match the mounting angle of the unit.
•
The
factory default setting is "6".
1.
Press the
[A]
button
to
set to the adjust
mode.
2. Touch -t
IJ
~
on the setting item display
to
select
"CONTRAST"
under "APPERNCE".
3. Either touch -t
IJ
~
on the right of the
display,
or
turn the [ROTARY] knob to adjust
the contrast.
* This setting item can be adjusted within
the range 1 to
11
.
Adjust this setting item while viewing
how
the appearance
of
the display changes.
4. Press the [A] button
to
return to the original
mode.
Making the LED
blink
when
DCP
is
removed
(BLINK LED)
You
can make the LED on this unit blink when
the DCP is removed.
•
The
factory default setting is "OFF".
1.
Press the
[A]
button
to
set to the adjust
mode.
2. Touch -tIJ
~
on the setting item display
to
select
"BLINK
LED"
under
"APPERNCE".
3. Either touch -tIJ
~
on the right of the
display,
or
turn the [ROTARY] knob to select
"ON"
or
"OFF".
4. Press the [A] button to return to the original
mode.
Operations Common to Each Mode
Setting the beep
for
when
buttons
are
operated
(BEEP)
The short
or
long high-pitched tone you hear
when a button is operated is called a "BEEP".
•
The
factory default setting is "ON".
1.
Press the [A] button to set to the adjust
mode.
2. Touch -tIJ
~
on the setting item display
to
select "BEEP" under "APPERNCE".
3. Either touch -t
IJ
~
on the right
of
the
display,
or
turn the [ROTARY] knob
to
select
"ON"
or
"OFF".
4. Press the [A] button to return
to
the original
mode.
Selecting each
mode
This item cannot be selected when the Dolby
Pro Logic
II
is set to "MUSIC"
or
"MATRIX" (cf.
page 17).
•
The
factory default setting is "PRO" for AC-
PROIII and "P.EQ" for EO SELECT.
• AC-PROIII
When "STO" (standard mode) is selected, the
sound quality and field can be adjusted by VSE
(Virtual Space Enhancer)
so
that
the
same
audio effect can be obtained whichever seat you
are sitting in.
When "PRO" (PRO mode) is selected, the
sound quality and field can be adjusted in detail
for each seating position.
• EQSELECT
When "P.EQ" (equalizer mode) is selected, the
entire frequency level range can be
compensated by a detailed smooth curve.
When
"BASfTREB"
(bass/treble mode) is
selected, the frequency level can be
compensated by dividing it into
2 major levels,
bass (low tones) and treble (high tones).
1.
Press the
[A]
button to set
to
the adjust
mode.
DXZ945MP
39
To Next Page
Loading...
