Clarion M303 Owner's Manual & Installation Manual

English
16
Bluetooth Operations Bluetooth Operations
1. Rotate the [VOLUME] knob to select “USER
PHONEBOOK” .
2. Press the [VOLUME] knob to enter the
selected phonebook.
3. Rotate the [VOLUME] knob to scroll the
contacts.
4. The phone number and the name to scroll
display.When the contact name is displayed,
press the [VOLUME] knob to call the mobile
phone No. of that contact.
* Press the [MENU / ] button to end the call.
Notes:
• Some mobile phones may not be able to
transfer data of Phonebook.
• After RESET, please wait few minutes until
data transferred following to the Bluetooth
mode selection. During that, “PHONEBOOK
UPDATING” is on the display.
• Redial
You can call last dialed number.
Press and hold the [BAND /
] button (1sec).
• Call Transfer
You can switch Handsfree call and mobile
phone call.
Press the [BAND /
] button during call.
• Answering a call
Yo u ca n an swe r a n i nco mi ng c all by
pressing the [BAND /
] button.
* Press the [MENU / ] button to reject an
incoming call.
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their audio system wirelessly and listen to
the tracks through the boat’s speakers. Please
consult your nearest Clarion dealer for more
information on the product of wireless audio
streaming transmitter offered.
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or sound choppy
on the song playback.
Au d io s tre am ing m ay o r m ay n o t
resume after telephone interrupt as this
is dependent on mobile phone.
S y s t e m w i l l a l w a y s r e t u r n t o
Ra di o m ode if audio s tr eaming i s
disconnected.
Note:
Be sure to read the chapter “Pairing”
before proceeding.
Play / Pause a track
1. Push the [ 4 ] button to pause audio
playback.
2. To resume audio playback, push the [ 4 ]
knob again.
Selecting a track
Track-up
1. Press the [
] button to move to the
beginning of the next track.
2. Each time the [ ] button is pressed,
playback proceeds to another track in
the advancing direction.
Track-down
1. Press the [ ] button to move to the
beginning of the previous track.
2. Each time the [ ] button is pressed,
playback proceeds to previous track in
the reverse direction.
Note:
Playing order will depend on Bluetooth
audio p layer . When [ ] b utton i s
pressed, some A2DP devices will restart
the current track depends on the duration
of playback.
Duri n g m u s i c s t r eami n g p l a y b ack,
“A2DP” will be shown on the display.
W h e n A 2 D P a n d H F P d e v i c e
i s d i s c o n n e c t e d , “ B L U E T O O T H
DISCONNECT” will be shown on the
The rear AUX termin als of this system is
provided to allow playback of sounds and music
from external devices connected to this unit.
Press [SRC /
] button on the panel to select
“AUX”.
AUX Input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2. Turn the [VOLUME] knob to select “AUX
SENS”.
3. If the output level of connected external audio
player is “HIGH”, rotate [VOLUME] knob
and choose “LOW”. And if the output level is
“LOW”, choose “HIGH”.
AUX Operations
display and return to previously selected audio
source. Some Bluetooth audio players may not
have play / pause synchronized with this unit.
Please make sure both device and main unit are
in the same play / pause status in BT MUSIC
mode.
ID3TAG display
During music streaming playback, for music
information that is longer than the display panel:
When SCROLL is ON, the LCD will display ID3
TAG information cyclely, e.g: ALBUM->TITLE
->ARTIST...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG information, the default
is TRACK, but user can adjust it to other
I D 3 TA G infor m a t i o n by press [ D I S P ]
button.

Clarion M303 Specifications

General

Brand	Clarion
Model	M303
Category	Marine Equipment
Language	English