Clarion M606 User Manual (English)

Other manuals for Clarion M606

Owner's Manual & Installation Manual31 pages

Owners And Installation Manual63 pages

Questions and Answers:

M
Maria JohnsonAug 13, 2025
Why is there no sound coming from my Clarion Receiver?
- K
  Kevin GarciaAug 13, 2025
  There could be several reasons for low or absent audio output from your Clarion Receiver. It could be due to improper audio output connections, so check the wiring and correct it if necessary. Ensure the volume isn't set too low and increase it. Damaged speakers can also cause this, consider replacing them. Check if the volume balance is heavily biased and adjust it to the center position. Insulate all speaker wiring connections in case they are in contact with metal parts of the boat. Also, ensure that the speaker power rating matches the unit, and if not, replace the speakers. Wrong or shorted speaker wiring connections can be the cause, so check and correct the wiring.
R
rmathewsAug 17, 2025
How to fix a Clarion Receiver that won't turn on?
- C
  clarkamberAug 17, 2025
  If your Clarion Receiver isn't powering on, the unit fuse or the boat battery fuse might be blown. Replace the blown fuse with a new fuse of the correct rating.
E
Edgar BarnesAug 20, 2025
What to do if my Clarion Receiver doesn't recognize the USB device?
- J
  Joy MooreAug 21, 2025
  If your Clarion Receiver isn't recognizing the USB device, the USB device might be damaged. Try disconnecting and reconnecting the USB device. If it's still not recognized, try replacing it with a different USB device.
M
Michael Guzman MDAug 25, 2025
Why does my Clarion Receiver keep resetting when the engine is off?
- R
  Richard YoungAug 25, 2025
  If your Clarion Receiver resets itself when the engine is off, it could be due to an incorrect connection between ACC and the Battery. Check the wiring and correct it.
T
Tina ArmstrongAug 28, 2025
How to reset Clarion Receiver when it won't turn on?
- K
  Karen WhiteAug 28, 2025
  If your Clarion Receiver won't power on, buttons don't respond, and the display is inaccurate, it might be due to a microprocessor malfunction. Turn off the power, open the front panel, and press the [RESET] button with a thin rod. Note that pressing the [RESET] button will turn off the ACC power and clear preset radio stations and titles stored in memory.
N
Noah WallaceSep 1, 2025
Why does the sound skip on my Clarion Receiver?
- B
  blanchardlaurieSep 1, 2025
  If the sound skips or is noisy on your Clarion Receiver, the MP3/WMA files may not be encoded properly. Use MP3/WMA files that are encoded correctly.
F
Francisco DunnSep 4, 2025
What to do if USB device cannot be inserted into Clarion Receiver?
- J
  Julie HudsonSep 5, 2025
  If you cannot insert the USB device into your Clarion Receiver, it might be because the USB device has been inserted in the wrong direction. Try reversing the connection direction of the USB device and try again. Alternatively, the USB connector may be broken, in which case you should replace it with a new USB device.

Clarion M606 Specifications

General

Type	Marine Digital Media Receiver
Bluetooth	Yes
Water Resistance	Yes
Radio Tuner	AM/FM
USB Port	Yes
Audio Formats Supported	MP3, WMA
USB Input	Yes
SiriusXM Ready	Yes
Pandora Internet Radio	Yes
iHeartRadio	Yes
Power Output	200W (50W x 4 Channels)
Amplifier Output	50W x 4
Preamp Outputs	2