Clarion NZ503 User Manual (English)

Other manuals for Clarion NZ503

User Manual230 pages

Owner's Manual & Installation Manual64 pages

Questions and Answers:

T
Tracey AbbottAug 21, 2025
How to fix poor audio quality after Bluetooth connection with Clarion Car Receiver?
- K
  Kathleen MartinAug 21, 2025
  If the audio quality is poor after connecting a Bluetooth enabled device to your Clarion Car Receiver, it may be because the microphone is not correctly positioned. Use an optional external microphone and adjust its position. It could also be that the Bluetooth reception is poor. Try moving the device closer to the car audio system or remove any obstacle between the device and the system.
S
Steven DiazAug 22, 2025
Why can't I pair my Bluetooth device with my Clarion Car Receiver?
- S
  Scott DuranAug 23, 2025
  If you cannot pair your Bluetooth enabled device with the Clarion Car Receiver, the device may not support the profiles required for the system. Try using another device to connect. Also, ensure the Bluetooth function of your device is enabled by referring to its user manual.
J
John JohnsAug 25, 2025
Why does my Clarion NZ503 Car Receiver not turn on?
- Y
  ydanielAug 25, 2025
  Your Clarion Car Receiver might not be turning on because the fuse is blown. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Alternatively, there might be incorrect wiring. In this case, consult your installation center.
R
Richard PriceAug 26, 2025
What to do if my Clarion NZ503 USB device is not recognized?
- K
  Kevin VaughnAug 27, 2025
  If your Clarion Car Receiver doesn't recognize the USB device, disconnect it and reconnect it. If it's still not recognized, try a different USB device. It's possible the USB device is damaged. Also, check for loose connectors.
K
Kylie LewisAug 27, 2025
Why does my Clarion NZ503 Car Receiver sound skip or is noisy?
- A
  Andrea MoonAug 27, 2025
  If the sound skips or is noisy on your Clarion Car Receiver, the disc might be dirty. Clean it with a soft cloth. It could also be that the disc is heavily scratched or warped; if so, replace it with a disc in good condition.
M
morrisjeremyAug 29, 2025
What to do if nothing happens when I press buttons on my Clarion NZ503 Car Receiver?
- K
  Kimberly JohnsonAug 29, 2025
  If nothing happens when you press the buttons on your Clarion Car Receiver, and the display is not accurate, the microprocessor may have malfunctioned. Press the reset button with a thin rod to solve this. Note that when the reset button is pressed, the power will turn off, and frequencies of radio stations, titles, etc. stored in memory will be cleared.
T
Theresa DeleonAug 31, 2025
What to do if my Clarion NZ503 Car Receiver disc cannot be loaded?
- R
  Robert HaydenAug 31, 2025
  If your Clarion Car Receiver won't load a disc, it might be because a disc is already loaded. Eject the disc before loading a new one. Another reason could be foreign matter in the disc slot. Remove any foreign matter, or consult a service station.
T
Teresa RichardsSep 1, 2025
Why is the video of iPod/iPhone image disturbed on my Clarion Car Receiver?
- N
  Nicole FoxSep 2, 2025
  If the video of your iPod/iPhone image is disturbed on your Clarion Car Receiver, the TV Signal setting of the iPod/ iPhone is not set correctly. Set the TV Signal setting (NTSC/ PAL) of the iPod/iPhone correctly.
K
Kyle FieldsSep 3, 2025
What to do if my Clarion NZ503 Car Receiver video images are not displayed?
- M
  Michael AndersonSep 3, 2025
  If video images are not displayed on your Clarion Car Receiver, check that the parking brake is engaged.
K
kimdawnSep 5, 2025
Why does my Clarion NZ503 Car Receiver USB device cannot be inserted?
- M
  Mary JohnsonSep 5, 2025
  If a USB device cannot be inserted into your Clarion Car Receiver, it might be inserted in the wrong direction. Try reversing the connection direction. If that doesn't work, the USB connector may be broken, and you should replace it with a new USB device.

Clarion NZ503 Specifications

General

MP3 playback	Yes
CD-RW playback	-
Audio formats supported	MP3, MP4, WMA
Supported radio bands	AM, FM
Display type	LCD
Display diagonal	7 \
USB version	2.0
Bluetooth profiles	A2DP, AVRCP, DUN, HFP, HSP, OPP, PBAP
Line outputs (RCA)	6
USB ports quantity	1
Headphone connectivity	3.5mm
Output power	200 W
Product color	Black
Disc types supported	CD, DVD
Audio output channels	4.0 channels
Maximum power per channel	50 W