Clarion NZ503 - Object Types; Elements of the Active Route

2.2.3.6 3D object types
Clarion Mobile Map supports the following 3D object types:
Type
Description
3D terrain
3D terrain map data shows changes in terrain, elevations or depressions in the land
when you view the map in 2D, and use it to plot the route map in 3D when you
navigate. Hills and mountains are shown in the background of the 3D map, and
illustrated by color and shading on the 2D map.
Elevated roads
Complex intersections and vertically isolated roads (such as overpasses or bridges)
are displayed in 3D.
3D landmarks Landmarks are 3D artistic or block representations of prominent or well-
known
objects.
3D buildings
3D block representation of full city building data containing actual building size and
position on the map.
2.2.3.7 Elements of the active route
Clarion Mobile Map shows the route in the following way:
Symbol
Name
Description
Current GPS position and Start
point
Your current position displayed on the map. If roads are
near, it is aligned to the nearest road.
Normally if GPS position is available, the route
starts
from the current position. If there is no valid
GPS
position, Clarion Mobile Map uses the
last known
position as the start point.
Waypoint (intermediate
destination)
An intermediate destination of the route
before reaching
the final destination.
Destination (end point) The final destination of the route.
Route color
The route always stands out with its color
on the map,
both in daytime and in night color mode.
Streets and roads that are
excluded from the navigation
You can choose whether you want to use or avoid
certain road types (page 86). However, when Clarion
Mobile Map cannot avoid such roads, the route will
include them and it will show them in a color that is
different from the route color.
NZ503 English 17