Clarion NZ503 - Saving a Location as an Alert Point

3.6 Saving a location as an alert point
You can save any map location as an alert point (for example a speed camera or a railroad crossing).
1. Browse the map and select a location. The red Cursor appears there.
2. Tap
.
3. Scroll down the list and tap
.
4. On the newly opened screen, select the type of the alert point, the direction from which you expect
the alert, and (if applicable) the speed limit for this alert point.
5. Tap
to save the location as a new alert point.
NZ503 English 71