MS5500 Installation Manual - Page 1
1. Be sure to read the manual thoroughly before beginning the installation to ensure a proper
understanding of the MS5500 and its functions.
2. Verify system contents:
❑ Main Unit
❑ Two 3-Button Remote Transmitters
❑ Siren
❑ Logic Sensor II
❑ Harnesses
• 14-Pin main harness
• 4-Pin auxiliary function harness
• 2-Pin Status LED harness
• 2-Pin Override Switch harness
• Pre-wired starter kill relay socket with relay
3. Discuss the location of the status LED and the Emergency Override Switch with the
vehicle’s owner.
4. Discuss the optional features of the MS5500 and the features that must be programmed
during installation, with the vehicle’s owner.
5. Check all of the vehicle’s operating systems before and after the installation.
Before You Begin
To Next Page
Loading...
Need help?
General
