Clarion VRX8271 - Cleaning

• Do not hold on the LCD panel when adjusting
the angle of the LCD panel. Doing so may
damage it.
• In extremely cold weather, the movement of the
picture may be slow and the display may be
dark, but this is not a malfunction. The set will
work normally once the temperature increases.
• Small black and shiny dots inside the LCD
panel are normal for LCD products.
• The LCD panel may stop temporarily when it
is opened or closed when the engine is
stopped or when it is cold. This is not a mal¬
function. if this happens, repeat the opera¬
tion.
Cleaning _
• Cleaning the cabinet
Use a soft, dry cloth and gently wipe off the
dirt.
For tough dirt, apply some neutral detergent
diluted in water to a soft cloth, wipe off the dirt
gently, then wipe again with a dry cloth.
Do not use benzene, thinner, car cleaner,
etc., as these substances may damage the
cabinet or cause the paint to peel. Also, leav¬
ing rubber of plastic products in contact with
the cabinet for long periods of time may
cause stains.
• Cleaning the LCD panel
The LCD panel tends to collect dust, so wipe
it off occasionally with a soft cloth.
The surface is easily scratched, so do not rub
it with hard objects.
Scratch
11