Clarion VRX8271 - Clarion VRX8271 Rear Vision Camera; Camera Operation and Connection

Rear Vision Camera
Note:
• Use this camera as an auxiliary means to check¬
ing obstacles.
Monitoring the rear vision camera
The rear vision camera can be connected to this
unit.
For the power supply of the camera, mount the
power box sold separately (CCA-147).
Note:
• This function is not available when the display is
stored.
1) Press the ADJ button 51] to select the CON¬
FIGURATION display.
2) Slide the Up/Down button [D to ▼ (down) or
▲ (up) to move the cursor to "CCD”.
3) Slide the Up/Down button |T] to ► (right) to
change "OFF” to “ON”.
CONFIGURATION : .
GI2JEZ2
1
Rp
S9NH 5 .UB.AT! QN ... „
Note:
• When "CCD" in the CONFIGURATION display is
turned on, the setting can be switched even if the
camera has not been connected.
4) Press the ADJ button jw) to return to the pre¬
vious mode.
5) In radio mode, press the VISUAL button 51]
to switch to the camera mode. In CD chang¬
er mode, press the VISUAL button 08] twice
and go to the camera display.
* In camera mode, the illumination colour of the
VISUAL button 5H changes. (If green illumina¬
tion is selected, the VISUAL button lights
amber; if amber illumination is selected, the
VISUAL button lights green.) When sound is
set to MUTE/PAUSE, the VISUAL button 5H
alternates between amber and green.
Note:
• When you shift into the reverse gear, the rear
vision camera is automatically turned on.
*To cancel the rear vision camera, change "ON” to
“OFF” of the "CCD" in step 3) above.
Connecting an external monitor
An output terminal for an external monitor is pro¬
vided on the back of the unit to connect an exter¬
nal monitor.
1) Press the ADJ button 5U to select the CON¬
FIGURATION display.
2) Slide the Up/Down button QJ to ▼ (down) or
▲ (up) to move the cursor to "MONITOR".
• RONFlGIIHATinN
CONFIGURATION
—mm
pn
— wmm
Up ■
3) Slide the Up/Down button Q] to ► (right)
and switch “AUDIO” to “VISUAL”.
* Slide the Up/Down button 0 to ► (right)
again to return to "AUDIO”.
AUDIO : Display becomes black.
VISUAL: The rear vision camera is monitored
on the display. (Applicable only
when the rear vision camera is con¬
nected. When It has not been con¬
nected, display becomes black in
radio, CD, or ISR mode.)
4) Press the ADJ button 05} to return to the pre¬
vious display.
A WARNING
THIS PRODUCT IS NOT INTENDED FOR
VIEWING TELEVISION BROADCASTS OR
VIDEO TAPES OR FOR PLAYING VIDEO
GAMES. Such uses of this product may
distract the driver or interfere with the dri¬
ver’s safe operation of the motor vehicle
and may violate state law. CLARION DIS¬
CLAIMS ANY LIABILITY FOR ANY BODILY
INJURY, INCLUDING FATALITIES, OR
PROPERTY DAMAGE THAT MAY RESULT
FROM ANY SUCH UNINTENDED USES OR
FROM ANY IMPROPER USE OF THIS
PRODUCT.
21