Clarion VRX8271 - 10 Error Displays.34

10. ERROR DISPLAYS
■ If an error occurs, the type of error is displayed.
Take the measures described below to eliminate the problem.
Error display Name of error
Description
ERROR 1
Memory error
This error occurs if the disc loading data, etc., is lost due to wear
of the CD auto changer’s battery.
(Remove all the discs from the magazine, insert the empty mag¬
azine and press the eject key to return to the first disc.)
ERROR 2
Mechanical error
This error occurs if there is a problem with the mechanism and
the eject or disc selection operation is not completed in the speci¬
fied amount of time.
(Consult the nearest Clarion service shop or customer clinic.)
ERROR 3
Functional error
This error occurs if the pickup cannot focus after several tries due
to scratches on the disc, signal interference, etc.
(Replace the disc.)
ERROR 6
Disc error
This error occurs when the disc is loaded upside-down.
(Reload the disc properly.)
TEMP ERROR
Temperature error
This error occurs when the CD mechanism's temperature sensor
detects that the temperature is too high.
(When the temperature returns to normal, playback starts.)
34