Clarion VRX8271 - Wire Connections Guide

7. WIRE CONNECTIONS
CD changer terminal
Rear vision camera (CCD) terminal
Rear View of the Source Unit
Attached connection lead
, d n Red : AUDIO output right
n White : AUDIO output left
Yellow : Rear vision camera output
NO FADER (*1)
Orange
White/red
==4HG=C>
-rrrrs'T'i
Black
Orange/white
■
Red
-UlLci-t-J
EO
Parking brake lead (*7)
Rear vision camera control lead (*7)
Ground lead (*2)
Illumination power supply lead
Accessory power supply lead (*3)
DSP/EQ
HUED Main power supply lead (*4)
Ground lead (*2)
~1= |.—C Hi Amplifier control (remote-turn-on) lead (*5)
OHI ©Rearleft
©Rear right
=fllISO ©(Rearleft
© Rear right
® Front left
=Sa ©Front right
© Front left
=HIISO © Front right
> Connect to the Speakers.
Radio antenna terminal (JASO ) (*7)
Audio output (input) terminal L+R (RCA) (*6)
* 1: Fader cannot be adjusted with these outputs. Connect them to an amplifier (sold separately), etc.
* 2: Connect securely to the metal part of the vehicle with a screw, etc.
*3: Connect to the power supply terminal whitch can be turned on and off by the ignition switch.
*4: Connect to the power supply terminal where the power is always supplied regardless of whether
the ignition switch is turned on or off.
* 5: Connect to the remote turn-on lead of amplifiers.
*6: Connect to an external amplifier or Clarion expand DSP/EQ (sold separately), etc. using the RCA
lead (L, R) (sold separately).
*7: Use the attached extension lead when necessary.
43