Clarion VRX8271 - Cautions on Installation.38; Package Contents.38

2. PACKAGE CONTENTS
(D Source unit
(2) Tuner amplifier unit
® Manuals
Owner's Guide & Installation
Warranty card
@ Connection lead
(for the source unit and the tuner amplifier unit)
<5> Antenna extension lead
® Power supply lead
(for the tuner amplifier unit)
® Parking sensor extension lead
(orange)
® Extension lead for rear vision camera
(white/red)
® Bag for accessories of the source unit (No. 1)
Flat head screw (M5 x 8).4
Sems hexagonal bolt (M5 x 8).5
®> Bag for accessories of the source unit (No. 2)
Hook plate.2
Zip tie
Spacer
Mounting screw
® Bag for accessories of the tuner amplifier unit
Mounting bracket.
Plastic blind clip.
Mounting screw (M4 x 8).
@ Universal mounting bracket
® DCP case
3. CAUTIONS ON INSTALLATION
1. Prepare all articles necessary for installing
the source unit before starting.
2. This model is used with the LCD panel slid
forwards (shell loading system). On some
types of cars, the LCD panel may touch the
dashboard or shift stick, in which case it can¬
not be installed. Check that the set will not
hamper operation of the shift stick before
choosing the place of installation. (Figure 2)
Dashboard
/
(check that it does not
touch the LCD.)
Figure 2
3. I nstall the unit within 30° of the horizontal
plane. (Figure 3)
Figure 3
4. If you have to do any work on the car body,
such as drilling holes, consult your car dealer
beforehand.
5. Use the enclosed screws for installation.
Using other screws can cause damage.
(Figure 4)
Chassis Chassis
Figure 4
6. T he source unit has mounting screw holes for
NISSAN (N marks) and TOYOTA (T marks)
vehicles, and for Clarion installation kit (C
marks).
When you use a mounting kit sold separate¬
ly, affix the screws to the • marks above
according to the type of the vehicle.
(Figure 5)
Tf N ■
J
) ©
4
I s ® (|.)
i)
1
ii ii
C T C N
Figure 5
38
C\J