Clarion VX402A

42 VX402A/VZ402A
English
Owner’s Manual
TV/VTR (When connecting an optional TV tuner, etc.)
Problem Cause Measure
The image is not displayed. Theparkingbrakeisnot
engaged.
Checkthattheparkingbrakeis
engaged.
Thedisplayisdark. Thebrightnesscontrolistoo
low.
Adjustthebrightnessproperly.
The operating condition is not
good.
The temperature inside the
vehiclemaybe0°C or lower. Set
to an appropriate temperature
(25°Corso)andcheckitagain.
Theheadlightofthevehicle
is lit
Thedisplayismadedark
atnighttopreventtheglare
(When the headlight of the
vehicleislitinthedaytime,the
displaygetsdark).
When the VTR is connected,
theimageisdisturbed.
Improper NTSC/PAL setting Set the AUTO/PAL/NTSC
properly according to the VTR.
Therearered,green,andblue
points in display.
-------------------- Thisisnotafailure,buta
phenomenon peculiar to a
liquidcrystalpanel(Theliquid
crystal panel is produced
according to technology with
veryhighprecision.Notethat,
thoughthereareeective
pixels of 99.99% or more, pixel
missing or normally lit pixels
account for 0.01%).