Clarity E814CC - Page 32

32
Turn On of Off the Message Alert Tone
You can select to turn on or off the message alert (for missed calls).
1. Press <OK/MENU> and <UP/DOWN> to select Answering sys.
2. Press <OK/MENU> and <UP/DOWN> to select Ans sys setup.
3. Press <OK/MENU> and <UP/DOWN> to select Msg alert tone.
4. Press <OK/MENU> and <UP/DOWN> to select ON or OFF.
5. Press <OK/MENU> to conrm; display shows Saved.
USING YOUR CORDED BASE