EasyManua.ls Logo

Clark WPL 25 - Pre-Operation Checks and Readiness

Clark WPL 25
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5.2
Be sure that you have read and
understand the information in this
Operator's Manual before operating
the lift truck.
Before Operating the Truck
WARNING
This equipment can be dangerous if not used properly.
Safe operation is the responsibility of the operator.
Do not start or operate the truck, or any of its functions
or attachments, from any place other than the designated
operator's position.
CAUTION
Inspect your walkie/stacker lift truck before operating at
the start of the day or shift. Before putting your truck to
use, check the operation of the controls and all systems.
Starting from a Safe Condition
Always start from a safe condition. Before operating a lift truck, make
sure:
The emergency disconnect switch is in the "OFF" position.
Unplug battery charger.
Remove chocks from drive wheel.
Lower control handle to a comfortable operating position.
Align control handle in the intended path of forward or reverse
travel.
Turn key to the "ON" position.
Check to make sure your path of travel is clear of people or
obstructions.
Operating Procedures

Related product manuals