5.4
Operating Procedures
3. Lift Switch
The switch is used for lifting the forks. The movement speed is not
adjustable. The switch is automatically turned o when the forks reach
a certain height as detected by a sensor.
4. Electronic Display
Displays Hour Meter, Battery Charge and Status of truck's operation.
5. Lower Lever
This lever is used to lower the forks from their raised height.
6. Directional/Speed Control
The direction/speed control is used to control the forward and backward
driving speed of the truck. Rotate the lever in the driving direction (for-
ward or backward). Truck speed increases the further you rotate the
direction/speed control. When the control is released, it rotate back to
the "neutral" position.
Emergency shut o switch
• During the operation of the truck, power may be
shut o completely by pressing the emergency
shut o switch in an emergency situation.
• The switch is installed on the top cover for
easy access by the operator.
• Make sure that the switch is kept turned
off when charging the batteries with the
truck-mounted battery charger.
To Next Page
Loading...
