9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
THE CONTROL PANEL
The control panel has the following buttons:
1. TIMER: Press this button to select the timer mode and the main display will
initially show “0”. Set the running time from 0-24 hours using the UP/DOWN
buttons.
2. POWER: Press this button to turn the unit on & off. When turned on, the
machine will start running in the previously selected mode.
3. MODE: Press this button to select from COOLING, FAN, and DEHUMIDIFY
modes.
4. UP/DOWN: Press the UP or DOWN buttons to set the required temperature
or adjust the running time in the TIMER mode.
• Press the UP/DOWN buttons simultaneously to switch from Celsius to
Fahrenheit display.
To Next Page
Loading...
