17
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
DUTY CYCLE
These welders are covered by
regulations EN 60974-1 and EN
60974-10, where the duty cycle is
expressed as a percentage of time
the machine may be used in a
given period for a specified welding
current.
Using the example shown, which is
an illustration of the data plate;-
e.g. when welding at 35 amps the
machine may be used for 6 minutes
(60%) in any 10 minute period.
ACCESSORIES
The following are some of the accessories available from your CLARKE dealer.
Please quote the part numbers shown below:
PART DESCRIPTION PART NUMBER
Welding Wire Spools Mini - 0.9mm flux-cored 8132110
Arc Activated Head-
shields
CWH6 6000671
CWH7 (Flame) 6000672
To Next Page
Loading...
Need help?
General
