17
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
ACCESSORIES
The following are some of the accessories available from your CLARKE dealer.
Please quote the part numbers shown below:
A selection of
• welding headshields
• replacement lenses.
• welding clamps,
• welding screens,
•gauntlets,
•aprons
are also available from your Clarke dealer.
Arc is unstable Insufficient current. Check condition of
electrode and earth wire
connection.
Electrode melts
obliquely
Electrode core is not
centred.
Magnetic blow
phenomenon.
Replace electrode.
Connect two earth wires
to opposite sites of the
work piece.
Machine stops
working.
Poor ventilation or high
environmental temperature
has caused the overheating
protection to operate.
Improve ventilation.
DESCRIPTION PART NUMBER
1.6 mm Welding Electrodes 3050580
2 mm Welding Electrodes 3050582
2.5 mm Welding Electrodes 3050586
DEFECT CAUSES SUGGESTIONS
To Next Page
Loading...
Need help?
General
