3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SAFETY WARNINGS
ELECTRIC SHOCK
1. Do not touch live electrical parts.
2. Never use electrode holders or cables which are damaged.
3. Keep the working environment, equipment, cables and clothing free from
grease, oil, moisture and dirt.
4. Ensure the welding machine has been correctly earthed.
5. The operator must be insulated from the floor and work bench using a dry
insulation mat.
6. Always ensure a second person is present in case of accident.
7. Keep welding cables away from power cables.
8. Regularly inspect the condition of the cables for signs of damage.
9. Remove the plug from the mains socket when not in use.
10. Ensure the earth connector is secured to bare metal adjacent to the weld,
and when not in use insulated for safety. - Keep all equipment well
maintained.
FUMES & GASES
1. The welding process generates hazardous fumes as a by-product.
Inhalation of these fumes is hazardous to health.
2. Keep your face away from the weld to avoid breathing the fumes.
3. If welding in confined spaces ensure adequate ventilation and use a fume
extractor.
4. By-products of welding can react to create a toxic/explosive environment.
FIRE OR EXPLOSION
1. Welding can cause fire and explosions. Precautions should be taken to
prevent these hazards.
WARNING: WHEN USING ELECTRICAL TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK AND PERSONAL INJURY
WARNING: READ ALL THESE INSTRUCTIONS BEFORE ATTEMPTING TO
OPERATE THIS PRODUCT AND KEEP THESE INSTRUCTIONS IN A SAFE PLACE.
To Next Page
Loading...
Need help?
General
