9
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
MAIN FEATURES
INVENTORY
The following components are supplied with the 80 Amp welding machine;
• Electrode holder with cable
• Earth clamp with cable
• Face Mask (in two parts plus handle)
• Dark glass filter lens (Shade no 11) for mask
• Clear protective glass lens for mask
THE WELDING SHIELD
1. Push the two halves of the shield
together as shown, making sure
the hooks and pins on the side
engage correctly.
2. Place the handle into position
and secure using the plastic nut
provided.
ARC-FORCE Automatically increases the current to prevent the elec-
trode sticking when operating with a short arc length .
HOT START Increases the welding current at the beginning of the
welding process.
ANTI-STICK The electrode can be easily withdrawn without it
becoming damaged.
To Next Page
Loading...
Need help?
General
