EasyManuals Logo

Clarke Power FG3000 User Manual

Clarke Power FG3000
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
16
MAINTENANCE
CHANGING THE ENGINE OIL
1. Unscrew and remove the oil filler cap/dipstick.
2. Place a oil collection tray under the drain plug.
3. Unscrew the drain plug, and allow the used engine oil to drain from the
crankcas
e into the oil collection tray.
NOTE: Drain the engine oil when the engine is warm, this will ensure the
oil flows out quicker.
4. Replace the drain plug and
its seal ring.
5. Fill the crankcase with engine oil to the ‘H’ mark
on the dipstick. See
page 9.
6. Replace the oil filler cap/dipstick.
ENVIRONMENTAL PROTECTION
One of the most damaging sources of pollution is oil, Do not throw away used
engine oil in with your domestic trash or down drains and sinks. Place it in a
leak proof container and take it to your local waste disposal site.
CAUTION: PROLONGED EXPOSURE TO USED ENGINE OIL IS DANGEROUS,
ALWAYS WASH YOUR HANDS THOROUGHLY AFTER HANDLING USED
ENGINE OIL.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke Power FG3000 and is the answer not in the manual?

Clarke Power FG3000 Specifications

General IconGeneral
BrandClarke
ModelPower FG3000
CategoryPortable Generator
LanguageEnglish

Related product manuals