Clarke Power FG3000 User Manual

17
CHANGING THE SPARK PLUGS
1. Remove the spark plug cap from
the spark plug.
2.
Add pic
Use the supplied spark plug
spanner to remove the spark plug.
3. Remove any carbon that has
accu
mulated around the
sparkplug.
4.
Check the spark plug gap (a), it
should be between 0.7 and 0.8
mm, adjust if necessary.
5. Check the overall condition of the
spark plug
and replace if
necessary.
6. Reinstall the spark plug and
replace the spark plug cap.
CAUTION: ALLOW THE ENGINE TO COOL BEFORE REMOVING THE SPARK
PLUG.

Clarke Power FG3000 Specifications

General

Brand	Clarke
Model	Power FG3000
Category	Portable Generator
Language	English