19
CLEANING THE FUEL VALVE FILTER / DRAINING THE FUEL TANK
1. Set the fuel supply valve to OFF.
2. U
Add pic
VALVE FILTER
‘O’ RING
CUP
nscrew and remove the cup,
then remove the valve filter and
‘O’ ring.
3.
Wash these parts in a non-
inflammable solvent. Make sure
that the valve filter
is not
damaged.
4. Place an approved petrol storage
container under the fuel valve
and set the fuel supply valve to
‘ON’.
• The fuel in the tank will drain
into the container.
5. Replace the ‘O’ ring and valve
filter and tighten
the cup as far as
possible.