Clarke Tiger 2600B User Manual

17
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
3. Remove the water inlet filter.
4. Connect other end of the braided
pipe to the water inlet.
5. Fill the priming bottle with water.
6. Connect the hose from the bottle
to the self-suction valve shown.
7. Place the filter into the water
source and start the pressure
washer, See “Starting your
pressure washer” on page 11.
8. Release the exhaust valve.

Clarke Tiger 2600B Specifications

General

Brand	Clarke
Model	Tiger 2600B
Category	Pressure Washer
Language	English