Clas Ohlson ASP-820 - Connecting External Devices; Bluetooth Pairing; Audio Socket Connection (AUX); Care and Maintenance

English
5
Plug thespeakers into aUSB port
Thespeakers are powered via theincluded USB cable. Connect thecable to theUSB
connection (3) and to aUSB port (USB mobile charger, computer, TV with USB port, etc.)
On/off
1. Turn on thespeakers using thecontrols (2). Select [ ] (a) to only turn on
thespeakers or [ ON ] (c) to turn on thespeakers with thelighting effects.
2. Turn off thespeakers by switching to the [ OFF ] (b) position.
Connecting anexternal device
Bluetooth (pairing)
1. Make sure that there is no audio cable plugged into theAUX (1) socket.
2. Turn on thespeakers using thecontrols (2). You will hear thesound “Bluetooth-
mode” which indicates that theBluetooth function is activated.
3. Activate Bluetooth mode on thedevice that you want to connect. Look for
thespeakers on thelist of detected devices on theBluetooth device (refer to
theinstruction manual of thedevice). Once thedevices have found each other,
thespeakers will appear as “ASP-820” on theBluetooth device.
4. Select ASP-820 in thelist. If you are required to enter aPIN code, enter 0000 (four zeros).
Certain devices may also require you to approve theconnection. Once theconnection
has been successful, you will head asignal from thespeakers.
5. Start playback on your Bluetooth device and adjust thevolume from it.
Audio socket (AUX)
1. Connect your device (e.g. smartphone) to theAudio socket (1) using theincluded
3.5mm audio cable.
2. Turn on thespeakers using thecontrols (2). You will hear thesound “AUX mode”
which indicates that theaudio socket is activated.
3. Start playback and adjust thevolume from your external device.
Information
• Thespeakers will automatically re-connect with thelast Bluetooth device they were
paired to.
• Bluetooth connection will automatically switch off on thespeakers once acable is
connected to theaudio socket.
Care and maintenance
Clean theproduct using adry cloth. Never use solvents or corrosive cleaning products.
Take care not to damage thespeaker drivers.