CLAUSING MS1318M - Page 18

2-2
SPECIFICATION
Model
/ Name of Equipment
MS1318M/MS1318SA
Capacity
Angle
0±
45±
60±
Round
13” (330 mm)
11.8” (300 mm)
8.6” (220 mm)
Square
11.0” (280 mm)
9.4” (240 mm)
8.6” (220 mm)
Rectangular
(H x W)
280 x 440 mm
(11 x 17.3 in.)
OR 140 x 500
mm (5.5 x 19.7
in.)
11” x 9.4”
(
280 x 240 mm)
11” x 8.6”
(
280 x 220 mm)
Saw Blade
Speed
98~328 fpm (30~100 m/min)
Size (L x W x T)
163” x 1.06” x 0.035” (4,140 x 27 x 0.9mm)
Pressure
19~20 kgs/ cm² (Tolerance: +1~+2 kgs / cm² )!
Tension
Manual / 1900~2000 kgs / cm²
(Tolerance: +100~+150 kgs / cm² )!
Guide
Interchangeable tungsten carbide
Cleaning
Steel wire brush
Motor
Output
Saw Blade
3 HP (2.2 kW)
Hydraulic
*(MS1318SA only)
1/2 HP (0.37 kW)
Coolant Pump
1/8 HP (0.09 kW)
Other Components
-------------------------------
Tank
Capacity
Hydraulic
*(MS1318SA only)
2.1 gal (8 L)
Coolant
7.9 gal (30 L)
Remnant Length
-------------------------------
Vise
Clamping
Control Method
-------------------------------
Min. Clamping Capacity
0 mm
Clamping Pressure
-------------------------------
Workbed
Height
32.3” (820 mm)
Weight
Ne
t
MS1318M: 1,320 lb (600 kg)
MS1318SA: 1,408 lb (640 kg)
Gross
MS1318M: 1,760 lb (800 kg)
MS1318SA: 1,848 lb (840 kg)
Floor Space (
L x W x H)
MS1318M: 84.7” x 51.93” x 57.8” (2,152 x 1,319 x 1,469 mm)
MS1318SA:87.44” x 43.38” x 57.8” (2,221 x 1,102 x 1,469 mm)
Operating
Environment
Temperature (煌 C)
5~40 煌 C (41~104 煌 F)
Humidity (%)
30~85% (without condensation)
*Please refer to the formula "Watt/Voltage = Amperage" with the information above.
* Design and specification are subjected to change without notice.
*The saw blade pressure and tension standard above are the general values. For special saw blade,
please contact to the saw blade manufacturer for the applicable values.
MS1318M / MS1318SA