3-1!
Section 3
MOVING &
INSTALLATION
LOCATION & ENVIRONMENT
UNPACKING & INSPECTING
LIFTING
REMOVING SHIPPING BRACKET
CLEANING
INSTALLING
RELOCATING
LOCATION & ENVIRONMENT
For your safety, please read all information regarding installation before proceeding. Install your
machine in a place satisfying all of the following conditions:
Space:
y
Leave enough free space around the machine for loading work and unloading cut-off pieces
as well as for maintenance and inspection. Refer to Section 2 Specification for machine
dimensions and floor space.
Environment:
y
Well lighted (500 lumen at minimum).
y
Floor kept dry at all times in order to prevent operators from slipping.
y
Away from direct exposure to the sunlight
y
Room temperature between 5˚C to 40˚C.
y
Humidity level kept at 30
~85% (without condensation) to avoid dew on electric
installation and machine.
y
Away from vibration of other machines
y
Away from powders or dusts emitted from other machines
y
Avoid uneven ground. Choose a solid level concrete floor which can sustain weight of both
machine and material.
y
Limit the operation area of the machine to staff only.
MS1318M / MS1318SA
To Next Page
Loading...