8-1!
Section 8
MAINTENANCE &
SERVICE
INTRODUCTION
BASIC MAINTENANCE
MAINTENANCE SCHEDULE
BEFORE BEGINNING A DAY’S WORK
AFTER ENDING A DAY’S WORK
Every 2 weeks
First 600hrs for new machine,then every 1200hrs for routine change
EVERY SIX MONTHS
STORAGE CONDITIONS
TERMINATING THE USE OF MACHINE
OIL RECOMMENDATION FOR MAINTENANCE
INTRODUCTION
For the best performance and longer life of the band saw machine, a maintenance schedule is
necessary. Some of the daily maintenance usually takes just a little time but will give remarkable
results for the efficient and proper operation of cutting.
BASIC MAINTENANCE
It is always easy and takes just a little effort to do the basic maintenance. But it always turns out to
be a very essential process to assure the long life and efficient operation of the machine. Most of the
basic maintenance requires the operator to perform it regularly.
MS1318M / MS1318SA
To Next Page
Loading...