CLAUSING MS1318M - Standard Accessories

4-8
Before descending the saw bow, please move the guide arm to a safe position to prevent it
from hitting the vise.
8. Emergency stop button
Press this button to stop the machine in an emergency. When the button is pressed, it brings the
machine to a full stop. The button locks when pressed. In order to unlock it, please turn the button
clockwise.
9. Power indicator lamp
When the lamp is on, it indicates the power to the machine is turned on.
10. Blade descend speed control knob
y
This knob is used to adjust the descend speed of the saw blade.
y
Turning the knob counterclockwise increases the blade descend speed.
y
Blade descend speed is a determining factor to a good cutting time and quality cutoff surface.
y
Also commonly known as the flow control valve
STANDARD ACCESSORIES
Blade tension device
y
This blade tension device provides appropriate tension to the saw
blade.
y
T
urn the handle clockwise or counterclockwise to tighten or loosen
the blade tension.
y
Please check the blade tension with the tensiometer.
y
The line should line up with the pointer after adjusting tension.
Never adjust blade tension while the blade is running.
Wire brush
The wire brush removes the metal chips on the saw blade teeth to so that
blade life can be extended.
Keep hands away from the brush while the wire brush is running
Turn off the hydraulic motor or the main power switch before performing
maintenance or cleaning on the wire br
ush drive system.
Handle
Pointer
Line
MS1318M / MS1318SA