4-7
*Optional Saw Blade Safety button
For safety purpose, to start saw blade, the operator has to press saw blade start button and *saw
blade safety button simultaneously. The saw blade safety button is on the right side of control box as
shown below.
Press emergency stop button to stop the blade.
4. Saw blade stop button
Press this button to stop the blade motor.
After the cutting job is done, the saw blade will stop and the saw bow will automatically go up
to the top limit switch position.
5. Saw bow up button
When this button is pressed, the saw bow rises until the operator lets go of the button.
While pressing the saw bow up button can stop the running blade, please still make use of the
emergency stop button in an emergency.
6. Saw bow down button
When this button is pressed for once, saw bow will automatically go down at the preset speed
adjusted by blade descend speed control knob.
Before descending the saw bow, please move the guide arm to a safe position to prevent it
from hitting the vise.
Press saw bow up button to stop saw bow descending.
7. Saw bow quick apporach button
When this button is pressed, the saw bow descends and approaches to the material at quick speed
until the operator lets go of button.
6DZEODGHVDIHW\EXWWRQ
MS1318M / MS1318SA
To Next Page
Loading...