4-5
*Optional Saw Blade Safety button
For safety purpose, to start saw blade, the operator has to press saw blade start button and *saw
blade safety button simultaneously. The saw blade safety button is on the right side of control box as
shown below.
Press emergency stop button to stop the blade.
4. Coolant pump selector
When this switch is turned to left, coolant pump starts and the coolant will be injected whether blade
is running or not. When this switch is turned to right, coolant will be injected when blade is running
and coolant will stop when the blade stops.
5. Blade descend speed control knob
y Turning the knob counterclockwise increases the blade descend speed.
y Blade descend speed is a determining factor to a good cutting time and quality cutoff surface.
y Also commonly known as the flow control valve
6DZEODGHVDIHW\EXWWRQ
MS1318M / MS1318SA
To Next Page
Loading...