2
Product Features
Powerful suction, intelligent suction adjustment
Powerful suction
With strong suction power, the product possesses superb cleaning capabilities- even tiny dust on the floor will be
thoroughly cleaned.
Intelligent Suction Power Adjustment
This product is able to automatically adjust its suction power when different floor environments are detected. Not only it
makes cleaning more efficiently, but also it helps to save more power.
Considerate Design
Easy step-by-step operation
By pressing only one button “ ”, you could easily direct the robot!
Dust bin is washable
Dust bin could be washed directly by tap water.
Simply wash dust bin under tap water per use to avoid dust
blowing to the air and cause a second pollution!
Various Cleaning Modes
Four cleaning modes are provided to meet your needs.
1. Auto cleaning mode
The robot will clean a room automatically and adjust its cleaning mode according to the environment.
3
Product Features
2. Spot cleaning mode
Press SPOT on the remote controller to start spot cleaning.
Note:
*It is suggested that users should select spot cleaning mode only
robot Cleans around the areas with much dust/dirt. After robot
finished cleaning For the dirtier area, it will automatically stop spot
cleaning mode and turn to auto cleaning mode.
3. Edge cleaning mode
Switch on the robot, press MODE on the remote control and select edge cleaning. Under edge cleaning
Mode, the robot will do cleaning along the obstacle by its side brushes.
4. Zig –Zag cleaning mode
Robot will automatically goes into Zig-Zag cleaning when it detected it’s in an open area or the
environment with less obstacles.
Note:
A. After switch on the robot, by press MODE on the remote
Controller, user can select edge cleaning. And user can
Also press ON/OFF button to stop it.
B. Mode1 for spiral cleaning, Mode 2 for random cleaning
Mode 3 for edge cleaning, Mode 4 for Zig- Zag cleaning
To Next Page
Loading...
