ICS-2003 INTERCOM STATION
1-10
View Forced Listens
This function displays destinations or sources of forced listens. Use the selectors
to select “Destinations” or “Sources.”
Viewing destinations displays all stations or interfaces always connected to the
station’s out-going audio. Viewing sources displays all stations or interfaces
always connected to the station’s incoming audio.
View Nearby Stations
This function displays all the labels set for nearby stations. This means that two
stations are within hearing distance of each other and that an audio path between
the stations can result in an audio feedback loop. Audio paths to stations
designated as nearby stations cannot be established.
Local Configuration Menu
Selecting the “Local Configuration” menu allows modifying the following items:
• “Answer Back Time-Out”
•“Internal Level Adjust”
• “Station Restrictions”
• “Display Brightness”
Answerback Time-out
This menu increases, decreases, or disables the time period a caller’s label will
remain in the answer-back window. The time period is adjustable from 10 to 60
seconds in 10 second increments; the default period is 10 seconds. Use the cursor
buttons or selectors to change the time-out period.
Internal Level Adjust
This menu changes the panel microphone, the headset microphone, and the
headset sidetone gain. Use the selectors to raise or lower the gain.
Station Restrictions
This function inhibits or enables the following station features:
• “Monitoring” alert tone
• “Select” station mode
• “Swap” window
• “Assign” selectors mode
• “Dial” phone mode
Use the selectors to select the desired function.
Display Brightness
This menu adjusts the brightness of the station’s display. Use the cursor buttons
or selectors to adjust the brightness.
To Next Page
Loading...
Need help?
General
