ICS-2003 INTERCOM STATION
1-9
Keypad: Administrative Buttons
The upper portions of 5 of the 12 buttons are labeled with the function active
during normal station operation; these functions are:
•(3) “Menu”
• (5) “Display Listen” Labels
• (9) “Swap” window
•(*) “Dial” phone
• (#) “SA” (studio/stage announce)
Menu Button (3)
The “Menu” (3) button on the keypad accesses the Information, Local
Configuration, System Configuration, and Maintenance menus. Pressing the
“Menu” (3) button also displays the station’s port number, label, firmware
version, internal level adjustment, and display brightness level.
To access the menus:
1. Push the “Menu” (3) button.
2. Use the selectors and keypad as indicated to select the appropriate menu.
This function can be inhibited through the configuration program.
If another station calls while in a menu, that station’s label will be added to the
answer-back stack and the operator’s voice will be heard. To respond, push the
“Answer Back” selector.
Information Menu
The Information menu allows viewing, but not modifying, the following items:
•“View Party Line Members”
•“View Fixed Group Members”
• “View Monitoring List”
• “View Forced Listens”
• “View Nearby Stations”
View Party Line Members
This function displays interfaces preset to a party line. Use the cursor buttons or
selectors to select the desired party line.
View Fixed Group Members
This function displays stations and interfaces in each fixed group. Use the cursor
buttons or selectors to select the desired fixed group.
View Monitoring List
This function displays all stations monitoring the station. An ear symbol in the
symbol window indicates monitoring of the station.
To Next Page
Loading...
Need help?
General
