13
R S - 6 0 1 B E L T P A C K
CONNECTING YOUR BELTPACK
An RS-601 beltpack works with all previous versions of Clear-Com
party-line stations and beltpacks. It is the first single-channel Clear-
Com beltpack that is compatible with Clear-Com TW beltpacks.
This means that you can wire several beltpacks together in a “daisy-
chain” or “home-run” configuration on a TW line that includes RS-
502/522 TW beltpacks as well as other RS-600 series TW beltpacks.
While the audio on the RS-601 will always be from pin 3 of the XLR
connector (channel B), it will still pass the channel A audio through
on Pin 2.
Figure 1: Control Panel of an RS-601 Beltpack
*OUFSDPN$POOFDUPS±QJOGFNBMF9-3
-PPQ±5ISPVHI$POOFDUPS±QJONBMF9-3
"VYJMJBSZ)FBETFU$POOFDUPSNNKBDL
)FBETFU$POOFDUPS±QJONBMF9-3
To Next Page
Loading...
