1 6
R S-601 BELTPACK
Headset Connector
You connect a headset to the beltpack at the 4-pin male XLR
connector labeled “headset.” The headset connector is always active
and has priority if a second headset is connected to the auxiliary
(“AUX”) connector. Generally you should connect only one headset at
a time to a beltpack.
With the onboard programming options or with V-Pack, you can
program the beltpack to provide power to an electret microphone.
The microphone’s gain automatically adjusts to the electret
microphone. See “Specifications” for impedance requirements.
Table 3: Pinouts for RS-601 Headset Connector
PIN FUNCTION
1Mic (Low)
2Mic (High)
3Headphone (Low)
4 Headphone (High)
14
To Next Page
Loading...
