15
R S - 6 0 1 B E L T P A C K
Auxiliary (“AUX”) Headphone
Clear-Com designed the auxiliary headset connector, labeled “AUX,”
for use with the CC-25 Ultra-Light headset. The beltpack’s circuitry is
designed to work with the CC-25 headset to produce excellent quality
sound.
While certain types of mobile-phone style headsets will fit the 2.5 mm
AUX jack, using these headsets may degrade system performance. You
can use such mobile-phone style headsets more reliably with
listen-only applications.
By default, the AUX connector provides bias voltage for electret
microphones. With V-Pack, you can also program this connector for
use with dynamic microphones.
Note: Using multiple mobile-phone style headsets in a system could
adversely affect nulling, crosstalk, and overall system performance.
Table 2: Pinouts for RS-601 Auxiliary Headset Connector
PIN FUNCTION
Tip Mic
Ring Earphone
Sleeve Common
13
To Next Page
Loading...
