5
Quick Start Guide
1. Plug in and turn on the device.
Using the included USB cable and power adapter,
plug in the Video2Digital® Converter 2.0 to a wall
outlet.
Then, power the device by pressing and holding
the power button for several seconds.
The device will automatically be in “Capture”
mode when you turn it on. You will see a blue
screen.
2. Plug in a USB flash drive or SD card.
Plug in a USB flash drive or SD card (not
included) into the converter. When you record
videos, the converter will save the digital videos
onto this drive.
To Next Page
Loading...
