Clesana C1 - Perform the electrical installation

19/3218/32
Specicaons
Specicaon Value
 
(the power supply must ensure 22A at rated voltage)
 2-pin connector housing

lines in the connector
housing

the toilet
Anderson SB50 connector housing 992G1
Crimp contact Anderson SB50 50 Amp Contact 5952
Cable diameter up to 8 m: 10 mm²
from 8 m: 16 mm²
Relay 

7.2. Perform the electrical installaon
No. Tools and consumables
1 
1 Press tool for cable lug and connector
— 
— Cable strap
— 

— Ring cable lug
1 Relay


1. 
2. 
3. 

4. 
ring cable lug.
5. 
access to the relay.
6. Connect the relay with the power






+

+
Clesana C1
–
EBL
+
EBL


7. Crimp the ends of the power cable to
the Clesana C1 with crimp contacts
Anderson SB50 and route in the con-
nector housing Anderson SB50.