Clevo N350TW - System Map: Rear View (Docking Station)

Disassembly
Removing and Installing the Hard Disk Drive 2 - 7
2.Disassembly
4. Remove the screw from the hard disk assembly (Figure 3d).
5. Slightly lift and pull the hard disk assembly in the direction of arrow (Figure 3b).
6. Lift the hard disk assembly out of the bay (Figure 3c).
7. Remove the screws - and the bracket from the hard disk
(Figure 3d).
8. Reverse the process to install a new hard disk (do not forget to replace all the screws and bottom cover).
6
7
6
8
9
10
11
12
13
d.
g.
12
13
f.
9
6
8
10
11
e.
7
Figure 3
HDD Assembly
Removal (cont’d.)
d. Remove the screw.
b. Slightly lift and pull the
HDD assembly in the di-
rection of the arrow.
c. Lift the HDD assembly
out of the bay.
d. Remove the screws and
HDD bracket.

8. HDD Assembly
12. HDD Bracket
13. HDD
•3 Screws