Clevo N350TW - Securing Computer to Docking Station

Disassembly
2 - 14 Removing the 3G Module
2.Disassembly
Removing the 3G Module
Figure 10
3G Module Removal
a. Disconnect the cables
and remove the screw.
b. The module will pop-up.
c. Remove the 3G module.
Note: Make sure you
reconnect the antenna
cable to socket.
1. Turn off the computer, turn it over, and remove the battery (page 2 - 5) and the component bay cover (page 2 - 9).
2. Carefully disconnect the cables
& , and then remove the screw (Figure 10a).
3. The 3G module will pop-up, and you can remove it from the computer (Figure 10b).
1
2
3
4
b.
a.
3
2
4
4
1
c.

4. 3G Module
•1 Screw