Clevo N350TW - Cold Undocking Computer from Station

Disassembly
Removing the Wireless LAN Module 2 - 15
2.Disassembly
Removing the Wireless LAN Module
Figure 11
Wireless LAN
Module Removal
a. Disconnect the cables
and remove the screw.
b. The WLAN module will
pop up.
c. Remove the WLAN
module.
Note: Make sure you
reconnect the antenna
cable to the “1 + 2”
socket (Figure 11b).
1. Turn off the computer, turn it over, and remove the battery (page 2 - 5) and the component bay cover (page 2 - 9).
2. Carefully disconnect the cables
- , and then remove the screw (Figure 11a).
3. The Wireless LAN module (Figure 11b) will pop-up, and you can remove it from the computer.
1
2
3
4
b.
a.
3
2
4
d.
4
1
c.

4. Wireless LAN
Module
•1 Screw